Is Your Device Not Performing Up to Spec? Here's How to Fix It! 🔧📱. There are times when your device might not seem to be performing as well as it should. Don't worry! Here are a few simple steps to get things back on track. 1. Check the Temperatur

Is Your Device Not Performing Up to Spec? Here&apos;s How to Fix It! &#x1F527;&#x1F4F1;There are times when your device might not seem to be performing as well as it should. Don&apos;t worry! Here are a few simple steps to get things back on track.1. Check the Temperature Dial &#x1F525;First, double-check that the temperature dial is set higher than 2. For optimal performance, we recommend setting the dial to 5, indicated by the small circle. If the dial is at 2 or lower, the device won&#x2019;t turn on due to a built-in safety feature.2. Ensure the Correct Mode &#x1F504;On-Demand Mode: Start the device by quickly clicking the power button three times. This mode requires you to hold the button down a few seconds before you begin to draw and continue holding while inhaling to keep the heater engaged. Look for a blinking light of a solid color to indicate this mode.Session Mode:&#xA0;Quickly triple-tap the power button and hold it down on the last click. This way, you can place your botanicals into your stem, then into the device, and start inhaling immediately, as the heater will be engaged at all times. A solid color light will indicate session mode.3. Listen for the Buzz &#x1F41D;One useful tip is to check if the device emits a buzzing or humming sound. This indicates that the heater is engaged. If you don&#x2019;t hear any noise and the above steps don&#x2019;t resolve the issue, please contact us at <a data-fr-linked="true" href="mailto:hello@planetofthevapes.com">hello@planetofthevapes.com</a>.4. Tighten the Screw &#x1F529;Sometimes, simply tightening the screw at the bottom can help. Give it a quick check and make sure everything is securely in place.By following these steps, your device should be back to its top performance in no time! Happy vaping! &#x1F60A;

My Tinymight Is Not Heating Up

Tinymight Vapor Production Troubleshooting Tip. If you’ve noticed a drop in vapor production with your Tinymight device, even though it seems to be functioning correctly, don’t worry—you’re not alone! One common issue that might be affecting your vap

Tinymight Vapor Production Troubleshooting TipIf you&#x2019;ve noticed a drop in vapor production with your Tinymight device, even though it seems to be functioning correctly, don&#x2019;t worry&#x2014;you&#x2019;re not alone! One common issue that might be affecting your vapor production doesn&#x2019;t trigger any error codes, so it can be a bit tricky to identify. Here&#x2019;s a tip to help you get your Tinymight back to producing vapor like it used to.<h3 dir="ltr" id> </h3><h3 dir="ltr" id="check-the-battery-lid-for-a-tight-fit">Check the Battery Lid for a Tight Fit</h3>Normally, if the display lights up when your Tinymight is plugged into the charger, shows that the battery is receiving a full charge, and turns on without issue, you might assume that the battery connection is solid. However, with the Tinymight, it&#x2019;s essential to check that the&#xA0;battery lid is screwed down tightly&#x2014;not just screwed down but fully secured.Here&#x2019;s why:<ul><li dir="ltr" style="text-decoration:none;">Loose Lid, Full Charge: If the battery lid isn&#x2019;t tightly screwed down, your Tinymight will still power on, and the LEDs will light up correctly, even showing a green light indicating a full charge.</li><li dir="ltr" style="text-decoration:none;">Vapor Production Issue: Despite this, the device may not be able to reach proper vaping temperatures, which results in low or no vapor production.</li></ul><h3 dir="ltr" id="what-to-do">What to Do</h3>If you&apos;re experiencing issues with vapor production:<ol><li dir="ltr" style="text-decoration:none;">Ensure the battery lid is screwed down tightly.&#xA0;Even if it looks secure, make sure it&#x2019;s fully tightened.</li><li dir="ltr" style="text-decoration:none;">Once the lid is tightly secured, test the device to see if it heats up properly and produces vapor.</li></ol>This simple step can often resolve the issue without any need for further troubleshooting.If you&#x2019;re still experiencing problems after trying this, don&#x2019;t hesitate to email us at hello@planetofthevapes.com for further assistance. We&#x2019;re here to help!

Tinymight Vapor Production

You have questions, we have answers, email us anytime.

Return to our website

POTV

Tinymight

Troubleshooting Guides

My PAX is flashing lights

PAX is too hot to touch

PAX not charging

Venty Error Code 004

Mighty error codes

Venty Firmware Update

Venty Common Issue

Storz & Bickel

My vaporizer isn’t charging

My Battery Won't Hold a Charge

Battery & Charging

My torch lighter isn’t working

Dynavap

My vape tastes weird

I am getting little to no vapor

I am unable to draw from my device

Herbs Are Not Extracting Evenly

Vapor Production

My Arizer is giving me error codes

Extreme Q Error Codes

Arizer Portable Harsh Vapor

Solo III Firmware Update

Upgrade Your Arizer Solo 3 (V1 to V2)

Arizer

The mouthpiece on my V3 Pro is wobbly/loose

XMAX V3 Nano Heating Issues

XMAX V3 Nano Bad Taste

XMAX

Loose Dosing Capsules

Fit Issues

Sensor Error: Replaceable Batteries

Error Codes

Low Airflow LOBO

LOBO Charging Issues

LOBO Volt Issue

LOBO Flickering Screen

POTV ONE & THE LOBO

My tracking isn't updating

Tracking

Do you offer free shipping?

Discreet Shipping

Shipping Policy

Pact Act

Shipping Policies

How long will it take for my order to be shipped?

Processing Time

Delivered but not received

Massachusetts Shipping

What should I do if my package was marked as delivered but I have not received it?

Shipping Issues

Shipping & Delivery

PAX 3 tips & tricks

Burn Offs

What temperature is best to vape at?

What accessories should I get?

Battery Warning/Hazard

Best vape for a beginner?

XMAX Accessories

Do I need Dosing Capsules?

Dosing Capsule Compatability

Shop by Vaporizer: Accessories Made Easy!

How To Use Dosing Capsules

How To Fill Your Bubbler

WPA Connection

Stuck Dosing Capsules

Getting Started

My Vaporizer is hot

My lips are burning

Hot Devices

Volcano Glass Adapter

How to use

LOBO Settings

LOBO Vapor Production

POTV ONE & LOBO

Dynavap: Everything you need to know

Dynavap Getting Started

Dynavap Components

Filling & Using Your Bubbler

Gordito Bubbler

Leaking Bubbler

Glass Accessories

Dosing Capsules vs Pads

Accessories

YLL Induction Heater Quick Start

Induction Heaters

Vaping Tips & Tricks

How do I start my return?

Return status

How do Exchanges work?

Exchanges

What is your return policy?

LOBO Return Policy

Is my item eligible for a return?

Return Policies

Warranty & Registration

Warranty

Returns & Refunds

I received a broken item, what should I do?

I received the wrong item, what should I do?

Items in my order came cracked

Received my order incomplete

Was My Gift Card Processed?

Order Discrepancies

Where can I track my order status?

I haven't gotten a confirmation for my order. What steps should I take next?

Partially Fulfilled Orders

Order Status/Information

I want to change my order

I want to add something to my order

Address Change

Can I combine my orders?

Order Changes

Register my vape

Vaporizer Registration

Age Verification

Age Verification: Not Working

Orders

Do you ship to my country?

What's your international shipping policy?

International Return Policy

International Information

Do gift cards expire?

Can I use multiple gift cards?

How do I get a gift card?

How do I use my gift card?

Where is my gift card?

Why is there a gift card in my cart?

Gift Cards

What are your payment methods?

Paypal?

Payment Methods

Sezzle isn't working

How do I pay with Sezzle?

Sezzle?

Sezzle: Refund Information

Sezzle

Payments

POTV ONE VS LOBO

Vape Comparisons

Convection, Conduction, or Hybrid?

Looking To Buy

Vaporizer Guides

Do You Offer a Military Discount?

Policies

Sale Information

Sales